Fingerless Single Facer Machine

Technical Specification :
Diameter Of Corrugated Roll : : 280mm
Diameter Of Pressure Roller: : 280mm
Diameter Of Applicator Glue Roll: : 240mm
Diameter Of Pre-Heater Roll: : 400mm
Motor & Heater Parameter:  
Main Driving Motor: : 11kw
Glue adjust: : Electric adjust
Normal Voltage: : 440v 60hz
Wind Suction Motor: : 11kw
Normal Voltage: : 440v 60hz
Continues (S1) : Working System
Dimension of Machine : W3500x H1600x L1280
Working Width : 1600mm
Operation Direction : Left Or Right (Client Choose)
Design Speed : 80m/Min
Working Speed : 60m/Min
Heating Way : Steam
Temperature Scope : 160-220 C
Pneumatic Working Pressure : 0.4-0.9mpa
Flute Profile : Buyer choice
Total Weight : Above 5500kg

 

Structural Features:

Paper Feeding: Fingerless Vacuum Suction, With High pressure powerful draught

fan with Fan motor power is 11KW

Wall plate: iron casting structure, thickness of the wall plate: 150mm and

Electric heating equipped 1 Set Universal Joint Transmission. Main transmission

Motor Power: 11KW

Corrugated roll: Include Upper Corrugated roll and Lower Corrugated Roll ,

Diameter of main corrugated roll: ¢280mm, and are made of 48 CrMo after hardening and tempering, inner holes fine boring, NC grinding, mid frequency quenching, surface grinding, the rigidity of surface is higher than HRC58.

Pressure roll : diameter ¢280mm, surface are grinding and plate chrome,

cylinder control pneumatic adjusting the gap between corrugated roll, glue roll & press roll

Glue roll: Special mesh treated, pneumatic control glue supply and glue back,

diameter of the applicator glue roll : ¢240mm, surface are treated by polished

and chrome plated. Electric adjusting glue width

Pre-heater roll :include upper preheating roll and lower preheating roll, adopt

seamless Steel Pipe Diameter ¢400mm.

Lubrication: Oil immersed type Lubrication, Reduce Noise

Bearing: NSK Japan Brand

Technical Specification :
Diameter Of Corrugated Roll : : 280mm
Diameter Of Pressure Roller: : 280mm
Diameter Of Applicator Glue Roll: : 240mm
Diameter Of Pre-Heater Roll: : 400mm
Motor & Heater Parameter:    
Main Driving Motor: : 11kw
Glue adjust: : Electric adjust
Normal Voltage: : 440v 60hz
Wind Suction Motor: : 11kw
Normal Voltage: : 440v 60hz
Continues (S1) : Working System
Dimension of Machine : W3500x H1600x L1280
Working Width : 1600mm
Operation Direction : Left Or Right (Client Choose)
Design Speed : 80m/Min
Working Speed : 60m/Min
Heating Way : Steam
Temperature Scope : 160-220 C
Pneumatic Working Pressure : 0.4-0.9mpa
Flute Profile : Buyer choice
Total Weight : Above 5500kg

 

Structural Features:

Paper Feeding: Fingerless Vacuum Suction, With High pressure powerful draught

fan with Fan motor power is 11KW

Wall plate: iron casting structure, thickness of the wall plate: 150mm and

Electric heating equipped 1 Set Universal Joint Transmission. Main transmission

Motor Power: 11KW

Corrugated roll: Include Upper Corrugated roll and Lower Corrugated Roll ,

Diameter of main corrugated roll: ¢280mm, and are made of 48 CrMo after hardening and tempering, inner holes fine boring, NC grinding, mid frequency quenching, surface grinding, the rigidity of surface is higher than HRC58.

Pressure roll : diameter ¢280mm, surface are grinding and plate chrome,

cylinder control pneumatic adjusting the gap between corrugated roll, glue roll & press roll

Glue roll: Special mesh treated, pneumatic control glue supply and glue back,

diameter of the applicator glue roll : ¢240mm, surface are treated by polished

and chrome plated. Electric adjusting glue width

Pre-heater roll :include upper preheating roll and lower preheating roll, adopt

seamless Steel Pipe Diameter ¢400mm.

Lubrication: Oil immersed type Lubrication, Reduce Noise

Bearing: NSK Japan Brand

Reviews

There are no reviews yet.

Be the first to review “Fingerless Single Facer Machine”

Your email address will not be published. Required fields are marked *

Scroll to Top